JWB series wire mesh corrugated packing
It is suitable for difficult-to-separate and heat-sensitive materials, avoid clogging and corrosion
Classification:
JWB series wire mesh corrugated packing
| Filler Type | Number of idea boards 1/m |
Specific surface area ㎡/m³ |
Porosity % |
Pressure drop MPa/m |
Bulk Density Kg/m³ |
Maximum F Factor m/s (kg/m³) 0.5 |
| JWB-700Y | 8-10 | 700 | 87 | 4.6-6.6x10-4< /td> | 180 | 1.3-2.4 |
| JWB-500X | 4-5 | 500 | 95 | 1.97x10-4 | 140 | 2.4 |
| JWB-250X | 2.5-3 | 250 | 97 | 1.02x10-4 | 70 | 3-3.5 |
◉ Structure
——cylindrical, each disc height 60-240mm
——The diameter of the tower is greater than 1.5 meters, and the packing plate is divided into blocks
——The stuffing pan consists of sheet metal mesh
——Wire mesh corrugated sheet is made of wire mesh by rolling large corrugations
◉Material
——stainless steel wire mesh
——special material, can be customized according to user requirements
◉Features
——large flux, low pressure, high efficiency
——large operation flexibility, good low load performance
——Poor corrosion resistance and anti-clogging performance
——small liquid holding capacity, suitable for rectification of heat-sensitive materials
◉Applications
——vacuum operation from 100 Pa to atmospheric pressure
——Columns suitable for batch operation and continuous operation
—— occasions requiring a high number of theoretical plates and a low pressure drop
——Occasions where total height is expected to be low
——Test tower for industrial scale-up
◉Note:
——The pressure drop values listed in the table correspond to the "Maximum F-Factor" values in the table
——The bulk density values listed in the table are the bulk density of stainless steel fillers,
The packing density of other materials should be multiplied by the ratio of the density of the selected material to the density of stainless steel, such as aluminum orifice corrugated packing should be multiplied by 0.34
——The packing sheet made of carbon steel is generally thicker than that of stainless steel, and its packing is densely packed Degree is 340~400Kg/m³
——liquid load for absorption is 0.2~200m³/㎡·hr
Previous Page
Previous Page
Product inquiry
Related Products